Plumbing problems, whether minor or major, can occur anytime. The greater the damage, the pricier the repair cost. It pays to be on the lookout for the common plumbing troubles that may come your way. And when they do happen, it’s best to know what to do or where to ask for help.
Slow-Draining Sink
A blockage is the main reason for a slow-draining sink, restricting water flow. It differs, of course, according to the kind of sink. For a kitchen sink, the blockage may be a combination of food remnants, congealed fat, and soap scum. As for a bathroom sink, the blockage may consist of soap scum and knotted hair. These clogs exist when you don’t regularly clean your sinks. If left untreated, the damage could get worse.
So, what do you do to get rid of this plumbing problem? You have to clean out the debris restricting the water flow. Get rid of whatever dirt is blocking the sink to get the drain flowing smoothly again. One option is to take out the pop-out and clean it out. If this doesn’t work, pour baking soda and vinegar down the drain. Using a plumber’s snake is also an option.
Running Toilet
There are many things that could cause a toilet to run. This is probably why many people are familiar with this plumbing problem. Usually, toilets run a lot because the toilet’s flapper valve is defective. This part restricts how water moves into the bowl from the tank. Should this be the reason for the running toilet in your home, a toiler repair kit from a hardware store should do the trick.
In some cases, however, silent leaks are also culprits for toilet runs. Sediment affecting the filling and flushing could also be to blame. To test if silent leaks are causing your toilet runs, pour some food coloring in the upper tank and check if it reaches the bowl without flushing. If it does, call your trusted 24-hour plumber in Salt Lake City.
Dripping Faucet
The drip, drip, dripping sound of a leaky faucet is frustrating. Apart from the noise, every drop adds up to your monthly water bills. Fixing it is easy and inexpensive. But, take note that you have to be wary of the particular type of faucet you have to fix.
There are four kinds of faucets: ball type, cartridge, compression, and ceramic disk. Rubber washers seal the valve seat when it comes to a compression faucet. As for the other three kinds of faucets, it could be the neoprene seal or the O-ring causing the leak that you have to replace. Fixing dripping faucets should be easy, but you will need the right tools. If you are uncertain, it’s best that you turn to a plumbing professional. Leave it to the experts not to make matters worse.
Plumbing problems are not as easy as they seem. There are, of course, some issues that you can handle, but when it comes to troubles that leave you confused, turn to the professionals. What you can do is watch out for these plumbing issues in your home and repair them before things get worse.